This simple accessory is an independent part, which can not only complement or emphasize the image, but change it and even save it.
It is very simple to sew a tying belt with your own hands, even if it is not provided for by a pattern.
In a long blouse from a special issue Burda. Fashion plus 1/2019, instead of the usual fastener, a tie belt is provided. If desired, you can tie it or wear a wide open blouse.
- Special offer
- 1
- 2
- 3
- 4
A tied belt can be cut out as one-piece or made of several pieces of fabric of the same size. Determine the width of the belt according to your desire.
Step 1
Cut out the details (part) of the belt. Duplicate if necessary.
Step 2
Fold the parts of the belt with the front sides, chop with each other and grind. Iron seam allowances.
Step 3
Fold the belt in half along the front side inwards.
Step 4
Chop the slices and grind, leaving an open section in the seam for turning out.
At the open seam, fasten.
Step 5
Cut the seam allowances close to the stitch, cut diagonally at the corners.
Step 6
Turn out a belt and press down.
Basic Hand Stitches
Step 7
Sew the open area of the seam manually with a blind seam.
For ease of wearing, perform loops for the belt.
How to make loops of thread for knitting
Source and illustration: Burda special issue. Fashion plus 1/2019