A simple and very sophisticated piece of jewelry with one or more beautiful beads on an invisible fishing line is very popular today.
Delicate suspension fits almost any look and has no age limit.
The fishing line is so thin that it is almost invisible on the neck, so it seems that the beautiful bead has frozen in the jugular fossa. And if the jewelry consists of several beads, then it seems as if they lay in bulk along the neckline.
One minus of such jewelry is the fastening near the fastener. If it is poorly fixed or made of low-quality material, then over time it may break. And if such a situation has occurred, do not despair, the suspension is easy to repair with your own hands.
DIY bead necklace
You will need:
✽ Metal beads "tubes";
✽ Small pliers;
✽ Small pliers;
✽ Small nippers
Step 1
Carefully remove the broken mount with a pair of pliers.
If necessary, cut the line where it was fixed earlier.
Step 2
Take one “tube” bead and thread a fishing line through its hole.
Step 3
Once again, extend the protruding tip of the fishing line into the hole of the “tube” bead so that a small ring forms.
Adjust the ring size and tail length.
Step 4
Take the pliers and pinch their ponytail and fishing line together.
DIY pearl necklace
Step 5
Use a pair of round pliers to squeeze the "bead" bead.
It should become as flat as possible without holes. Thus, the bead "tube" fixes the fishing line and the ring for the fastener.
Step 6
Cut the protruding tail with wire cutters.
Step 7
If necessary, replace the mount on the fishing line and on the other side of the fastener.
Done!
The author of the master class and photo: Julia Dekanova
